Emcefix floor can also be used to repair large areas of screed and concrete flooring. The screed in the photo was full of blowholes. They were closed with a large-area Emcefix floor scratch and blowhole filler compound, giving the floor a durable and aesthetically appealing repaired finish. MC-Bauchemie 2026
Emcefix floor can also be used to repair large areas of screed and concrete flooring. The screed in the photo was full of blowholes. They were closed with a large-area Emcefix floor scratch and blowhole filler compound, giving the floor a durable and aesthetically appealing repaired finish.
© MC-Bauchemie 2026
The recent test certificates underline the quality as well as the extensive application possibilities of Emcefix floor. The fine filler combines durable repairs with attractive aesthetics. With its resistance to freeze-thaw cycling and de-icing salts confirmed, it can also be reliably used in outdoor areas.
It is suitable for both small blemishes and major patching repairs on screed and concrete floors in layer thicknesses from 1 mm to 10 mm, as well as for the repair of steps, stairs and landings, spalled areas, cavities and blowholes in one pass with a layer thickness of up to 30 mm. Walls too can be filled and patched over large areas with this product. Given its impressive mechanical properties – compressive strength >35 N/mm² and flexural strength >6 N/mm² – it can also be used without reservation for surfaces accessible to both foot and forklift traffic.
This all-rounder for the repair of screed and concrete floors is easy to apply and simple to smooth. Emcefix floor hardens crack- and stress-free while also enabling walk-on access of the repaired surfaces after just six hours*. The fine filler rounds off MC-Bauchemie's concrete cosmetics product portfolio and is available in the colours concrete grey, medium grey and dark grey. These alone are sufficient to cover a wide range of concrete shades. However, the products can also be blended to match a specific substrate grey.
* following application at 20 °C and 50 % relative humidity
pageImpression = pageImpression + 1;
});
barba.init({
preventRunning: true,
timeout: 5000,
/*
for debuggin usi this parameters
debug: false,
logLevel: 'debug',
*/
/*sync: true,*/
// define a custom function that will prevent Barba
// from working on links that contains a `prevent` CSS class
prevent: ({ el, event, href }) => {
if (!el) {
return false;
}
if (el.href && el.href.includes('landingpages')) {
return true;
}
if (el.classList && el.classList.contains('prevent')) {
return true;
}
return false;
},
preventScroll: true,
scroll: false,
views: [],
transitions: [
{
name: 'header-transition',
sync: false,
from: {
custom: ({ trigger }) => {
if (trigger.classList && trigger.classList.contains('headerFlip')) {
transistionImage = trigger.getElementsByClassName("transitionImage")[0];
if (typeof transistionImage == "undefined") {
return false;
}
transisitionEffect = getRandomInt(1);
return true;
}
return false;
}
},
async leave(data) {
if (transistionImage === null) return; // can be null, return if null to not throw an error
if ( transisitionEffect == 0) {
const done = this.async();
let element = transistionImage;
let state = Flip.getState(element);
let headerImage = document.getElementById('headerImage');
headerImage.removeChild(headerImage.getElementsByTagName('img')[0]);
let headerContent = document.querySelector('.headerContent');
gsap.to(headerContent, {
opacity: 0,
});
let content = document.querySelector('.content');
gsap.to(content, {
opacity: 0,
});
headerImage.appendChild(element);
scroll(0,0);
Flip.from(state, {duration:0.9, ease: "power1.inOut", scale: true, absolute:true,});
await delay(900); // Der await Operator wird genutzt, um auf einen Promise zu warten. Er kann nur in einer async Funktion benutzt werden.
done();
}
},
enter(data) {
window.scrollTop = '0';
let content = data.next.container.querySelector('.content');
gsap.from(content, {
opacity: 0,
});
let headerContent = data.next.container.querySelector('.headerContent');
gsap.from(headerContent, {
opacity: 0,
delay: 0.5,
});
},
after(data) {
}
},
{
name: 'microsites_sliding_scroll',
sync: true,
from: {
custom: (data) => {
const { trigger, current, next } = data;
function getParent(pathname) {
const parts = pathname.split('/').filter(part => part !== '')
return parts.length > 1 ? parts[parts.length - 2] : parts[0] || null
}
if (trigger === 'popstate' || trigger === 'back' || trigger === 'forward') {
return false;
}
if(trigger.classList.contains('microsites_sliding_scroll') || trigger.classList.contains('sliding_scroll')){
return true;
}
if(current.namespace == 'template_138' && next.namespace == 'template_138') {
return getParent(current.url.path) === getParent(next.url.path)
}
return false;
}
},
to: {
namespace: [
'template_120',
'template_138',
]
},async leave({ current, next, trigger }) {
const debug = window.debug;
if (debug) console.log('Debug mode enabled');
const done = this.async();
const menuindexCurrent = +current.container.querySelector('[data-menuindex]').dataset.menuindex;
const menuindexNext = +next.container.querySelector('[data-menuindex]').dataset.menuindex;
const nextContent = next.container.querySelector('.content');
const currentContent = current.container.querySelector('.content');
let xPerc = menuindexCurrent < menuindexNext ? 100 : -100;
const navbarHeight = document.querySelector('.navbar').offsetHeight;
const pageHeight = document.querySelector('.header').offsetHeight;
const nextContentHeight = nextContent.offsetHeight;
const totalHeight = nextContentHeight + navbarHeight + pageHeight;
document.body.style.minHeight = `${totalHeight}px`;
const targetScrollY = trigger.classList.contains('microsites_sliding_scroll')
? pageHeight - navbarHeight
: pageHeight + navbarHeight;
const top = trigger.classList.contains('microsites_sliding_scroll') ? '0px' : '116px';
gsap.set(next.container, {
xPercent: xPerc,
position: 'absolute',
top: top,
left: 0,
display: 'block'
});
const tl = gsap.timeline({
onComplete: () => {
gsap.set(current.container, { display: "none" });
gsap.set(next.container, { clearProps: 'position,top,left,xPercent' });
gsap.set(nextContent, { clearProps: 'xPercent' });
document.body.style.minHeight = '';
done();
}
});
tl.to(currentContent, {
xPercent: -xPerc,
duration: debug ? 5 : 0.5,
ease: "power1.inOut",
}, 0);
tl.to(nextContent, {
xPercent: -xPerc,
duration: debug ? 5 : 0.5,
ease: "power1.inOut"
}, 0);
tl.to(window, {
scrollTo: { y: targetScrollY },
duration: debug ? 5 : 0.5,
ease: "power1.inOut"
}, 0);
},
enter({ next }) {
gsap.from(next.container, {
opacity: 0,
});
}
},
{
name: 'microsites_sliding',
sync: true,
from: {
custom: ({ trigger }) => {
if (trigger === 'popstate' || trigger === 'back' || trigger === 'forward') {
return false;
}
if(trigger.classList.contains('microsites_sliding')){
return true;
}
return false;
}
},
to: {
namespace: [
'template_120',
]
},
async leave({current, next}) {
const done = this.async();
const tl = gsap.timeline({onComplete: ()=>{
gsap.set(next.container, {clearProps: 'all'})
gsap.set(next.container.querySelector('.content'), {clearProps: 'all'})
}})
const currentContent = current.container.querySelector('.content')
const nextContent = next.container.querySelector('.content')
const currentH1 = document.querySelector('.currentPagetitle')
const currentIntrotext = document.querySelector('.currentIntrotext')
const nextH1 = next.container.querySelector('.pageTitle')
const nextIntrotext = next.container.querySelector('.introtext')
gsap.set(next.container, { xPercent: 100, position: 'absolute', top: 0, left: 0 })
tl.to(currentContent, {xPercent: -100, opacity: 0, duration: 1, ease: "power1.inOut", onComplete: () => {
gsap.set(current.container, { display: "none" });
}}, 0)
.to([currentH1, currentIntrotext], { opacity: 0, duration: 0.5, ease: "power1.inOut", onComplete: () => {
currentH1.innerText = nextH1.innerText;
currentIntrotext.innerText = nextIntrotext.innerText;
}}, 0)
.to([currentH1, currentIntrotext], { opacity: 1, duration: 0.5, ease: "power1.inOut" }, 0.5)
.to(nextContent, {xPercent: -100, duration: 1, ease: "power1.inOut"}, 0)
await delay(1000);
done();
},
enter({next}){
gsap.from(next.container, {
opacity: 0,
});
}
},
{
name: 'default',
sync: false,
async leave(data) {
const done = this.async();
gsap.to(data.current.container, {
opacity: 0,
duration: 0.5,
});
await delay(500); // Der await Operator wird genutzt, um auf einen Promise zu warten. Er kann nur in einer async Funktion benutzt werden.
scroll(0,0);
done();
},
enter(data) {
window.scrollTop = '0';
gsap.from(data.next.container, {
opacity: 0,
duration: 0.5,
});
},
after(data) {
// START: Ankur - 15062023 - For Scroll Position History
if(scrollHistory[data.next.url.href]) {
let scroll = scrollHistory[data.next.url.href];
window.scrollTo({top: scroll.y, behavior: 'instant'});
}
// END: Ankur
}
},
{
name: 'self',
enter() {
},
}
]
});
});
Germany
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Czech Republik
Denmark
Finland
France
Georgia
Great Britain
Hungary
Ireland
Latvia
Lithuania
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Spain
Sweden
Switzerland
Ukraine
Ethiopia
Ghana
Egypt
Guinea
Israel
India
Kazakhstan
Malaysia
Singapore
United Arab Emirates
Vietnam
Taiwan
Philippines
New Zealand
Australia
Canada
Brazil
Paraguay
Uruguay
Bolivia
Chile
Peru